Samsung Dishwasher Stopping Mid-Cycle
Stop safely, check installation and user-accessible cleaning points, then follow the exact model manual (about 5–30 minutes).
Fault description
The Samsung dishwasher shows the observed symptom: dishwasher stopping mid-cycle.
Stop safely, check installation and user-accessible cleaning points, then follow the exact model manual. Dismantle nothing and make no electrical measurements.
Causes
- Installation or operating condition — This is a possible cause; use only external checks in the exact E-Nr manual.
- Loading, cycle or user setting — This is a possible cause; use only external checks in the exact E-Nr manual.
- Blocked user-accessible filter, hose or airflow path — This is a possible cause; use only external checks in the exact E-Nr manual.
- Internal sensor, control or mechanical fault — This is a possible cause; use only external checks in the exact E-Nr manual.
Step-by-Step Fix
- 1
Stop safely
Pause the programme, wait for the drum to stop and do not force the door.
- 2
Record symptoms and E-Nr
Photograph the complete display and note the programme stage and exact appliance E-Nr.
- 3
Make safe external checks
Stop safely, check installation and user-accessible cleaning points, then follow the exact model manual. Follow every warning in the E-Nr manual.
- 4
Test no more than once
Test only after correcting an external cause, and never with leakage, burning smell, smoke, abnormal heat, an electrical fault or severe scraping.
- 5
Arrange Samsung service
Request service if the issue remains or returns; open no panels and test no internal parts.
When to call a service technician
Arrange Samsung service if the issue remains after documented external checks or if the pump, valve, door lock, drive, bearing, wiring or electronics are suspected.
Stop immediately for leakage near electricity, burning smell, smoke, sparks, abnormal heat, tripped protection or severe grinding or scraping.
Prevention
Follow installation and load guidance, empty pockets, dose correctly and keep visible hoses and user-accessible filters clean as the manual specifies.
Keep the washer level; internal component faults cannot be prevented through dismantling.
Spare parts and service
Visit our partners for spare parts and service
Spare parts
Book a repair
Frequently Asked Questions
Can I keep using the washer?
Only if it returns to completely normal operation after a safe external correction and no warning symptom is present.
Should I open an appliance panel?
No. Limit checks to parts the manual explicitly identifies as user-accessible.
Should I order a replacement part?
Not from the symptom alone. Internal faults require diagnosis for the exact E-Nr.
When is Samsung service required?
When the issue remains or returns, or when an internal, electrical, leakage or mechanical fault is suspected.