Washing Machine Trips the Electrics
Stop using the washer, unplug it if safe and have the electrical supply and appliance checked by qualified professionals (about 1–20 minutes).
Fault description
The washer trips a breaker, fuse or residual-current device.
Stop using the washer, unplug it if safe and have the electrical supply and appliance checked by qualified professionals. Open no panels, make no electrical measurements and do not order a part from the symptom or code alone.
Causes
- Fault in the appliance — This is a possible cause, not a confirmed parts diagnosis.
- Damaged cord, plug or outlet — This is a possible cause, not a confirmed parts diagnosis.
- Supply-circuit problem — This is a possible cause, not a confirmed parts diagnosis.
- Moisture or leakage near electrics — This is a possible cause, not a confirmed parts diagnosis.
Step-by-Step Fix
- 1
Stop safely
Cancel the programme. Do not restart after electrical tripping, a burning smell or leakage.
- 2
Isolate hazards
Unplug with dry hands if safe and close the water taps.
- 3
Check externally only
Stop using the washer, unplug it if safe and have the electrical supply and appliance checked by qualified professionals.
- 4
Record details
Photograph the complete symptom, note the PNC/model and what happened before the stop.
- 5
Use a qualified professional
Arrange authorised service; use a qualified electrician if the outlet, protection or fixed supply is suspect.
When to call a service technician
Arrange authorised service immediately for a burning smell, AE leakage indication, recurring CE or electrical tripping. Repeated cycle stops after external checks also require service.
Keep the washer unplugged for water near electricity, smoke, sparks, abnormal heat, a damaged cord or repeated tripping.
Prevention
Avoid overloading, dose correctly and regularly check visible hoses, cord and plug for damage without dismantling the washer.
Internal leakage, motor and electrical faults cannot be safely prevented or diagnosed through user maintenance.
Spare parts and service
Visit our partners for spare parts and service
Spare parts
Book a repair
Frequently Asked Questions
Can I keep using a Bosch washer showing —?
Stop using the washer, unplug it if safe and have the electrical supply and appliance checked by qualified professionals. Do not run another cycle until Bosch guidance or service confirms it is safe.
Can I reset — by switching the washer off?
Switching off is a safety step, not proof that the fault is repaired. If the code returns or Bosch classifies it as service-only, do not repeatedly reset the washer.
Does — identify a part to replace?
No. The code identifies a system or condition, but Bosch service should diagnose the exact cause before any part is ordered.
Why should I provide the E-Nr?
Bosch model families and markets can use different hardware and service procedures. The E-Nr identifies the correct appliance documentation.
May I test the sensor myself?
No. Do not remove panels or measure internal wiring, sensors or electronics. Bosch directs these codes to customer service.