Samsung Washing Machine Has a Bad Smell
Remove laundry, wipe and dry the gasket and drawer, then run the empty Self Clean, Pure Cycle or manual-specified cleaning cycle (about 5–30 minutes).
Fault description
Samsung identifies retained moisture, detergent or softener residue, a dirty gasket, drawer or filter and missed tub-cleaning cycles as common causes of musty odour.
Remove laundry, wipe and dry the gasket and drawer, then run the empty Self Clean, Pure Cycle or manual-specified cleaning cycle. Dismantle nothing and make no electrical measurements.
Causes
- Moisture retained behind a closed door — This is a possible cause; use only external checks in the exact E-Nr manual.
- Detergent or softener residue — This is a possible cause; use only external checks in the exact E-Nr manual.
- Dirty gasket, drawer or accessible filter — This is a possible cause; use only external checks in the exact E-Nr manual.
- Missed tub-cleaning cycle or a drain/plumbing odour — This is a possible cause; use only external checks in the exact E-Nr manual.
Step-by-Step Fix
- 1
Stop and empty the washer
Remove all laundry, switch off and wait for the drum to stop.
- 2
Separate odour from immediate danger
For burning smell, smoke, sparks or abnormal heat, isolate power safely, do not run the washer and arrange service.
- 3
Clean user-accessible surfaces only
Remove laundry, wipe and dry the gasket and drawer, then run the empty Self Clean, Pure Cycle or manual-specified cleaning cycle. Use only products and methods permitted by the model manual.
- 4
Allow the washer to dry
Dry the gasket and drawer and leave the door and drawer open when safe and the appliance is not in use.
- 5
Arrange Samsung service for damage
Do not use the washer if the gasket is torn, deformed or leaking, or if odour remains after correct cleaning.
When to call a service technician
Arrange Samsung service if the issue remains after documented external checks or if the pump, valve, door lock, drive, bearing, wiring or electronics are suspected.
Stop immediately for leakage near electricity, burning smell, smoke, sparks, abnormal heat, tripped protection or severe grinding or scraping.
Prevention
Follow installation and load guidance, empty pockets, dose correctly and keep visible hoses and user-accessible filters clean as the manual specifies.
Keep the washer level; internal component faults cannot be prevented through dismantling.
Spare parts and service
Visit our partners for spare parts and service
Spare parts
Book a repair
Frequently Asked Questions
Can I keep using the washer?
Only if it returns to completely normal operation after a safe external correction and no warning symptom is present.
Should I open an appliance panel?
No. Limit checks to parts the manual explicitly identifies as user-accessible.
Should I order a replacement part?
Not from the symptom alone. Internal faults require diagnosis for the exact E-Nr.
When is Samsung service required?
When the issue remains or returns, or when an internal, electrical, leakage or mechanical fault is suspected.