Samsung Washer Trips the Electrics: Stop and Get Help
Leave the washer off, do not reset the protection to retry it and arrange a qualified electrician or Samsung service as appropriate (about 5–15 minutes to make the washer safe).
Fault description
Repeated operation of an electrical protective device can indicate a supply, cord, outlet or internal appliance fault and must not be bypassed.
Leave the washer off, do not reset the protection to retry it and arrange a qualified electrician or Samsung service as appropriate. Open no panels, make no measurements and never bypass electrical protection.
Causes
- Damaged cord, plug or outlet — This is a possible cause; internal faults require professional diagnosis for the exact model.
- Unsuitable or faulty electrical supply — This is a possible cause; internal faults require professional diagnosis for the exact model.
- Moisture or insulation fault — This is a possible cause; internal faults require professional diagnosis for the exact model.
- Internal motor, heater, wiring or control fault — This is a possible cause; internal faults require professional diagnosis for the exact model.
Step-by-Step Fix
- 1
Stop safely
Stop the programme. For burning smell, smoke or tripped protection, leave the washer off and isolate power from a safe location.
- 2
Record the symptom
Photograph the display and visible symptoms and note the model number and when the problem occurred.
- 3
Make only the permitted external check
Leave the washer off, do not reset the protection to retry it and arrange a qualified electrician or Samsung service as appropriate. Do not touch a damaged plug or outlet or open any enclosure.
- 4
Decide whether restart is permitted
Restart is not permitted for this symptom.
- 5
Arrange professional help
Request Samsung service for an appliance fault and a qualified electrician for a suspected outlet or fixed-wiring fault.
When to call a service technician
Burning smell or repeatedly tripped electrical protection requires stopping without restart. Otherwise arrange Samsung service when safe external checks are insufficient.
Use a qualified electrician for a damaged outlet or fixed installation. Do not dismantle the washer.
Prevention
Follow load, installation and filter instructions, keep controls dry and use the specified grounded electrical connection without unsuitable extensions.
Internal mechanical and electrical faults cannot be prevented through dismantling or repeated resets.
Spare parts and service
Visit our partners for spare parts and service
Spare parts
Book a repair
Frequently Asked Questions
Can I continue when the washer trips the electrical protection?
Leave the washer off, do not reset the protection to retry it and arrange a qualified electrician or Samsung service as appropriate. Do not restart the appliance before professional assessment.
May I open the washer and inspect parts?
No. Do not remove panels or touch or measure the motor, pump, heater, wiring or electronics.
Does the symptom identify a replacement part?
No. The exact model and professional diagnosis are required before ordering any part.
When is Samsung service needed?
Arrange service if safe external checks are insufficient; for tripped protection or burning smell, keep the washer off.
When is an electrician needed?
Use a qualified electrician for a damaged outlet, plug or cord, or repeatedly tripped electrical protection.